Table of Contents
Advertisement
OS INSTALLATION TIPS
Below is Altos R920 OS certification matrix:
Operating System
Windows Server 2008 Enterprise
Edition
Windows Server 2008 Enterprise
x64 Edition
Windows Server 2003 R2
Enterprise Edition
Windows Server 2003 R2
Enterprise x64 Edition
Red Hat Enterprise Linux 5.0
Red Hat Enterprise Linux 5.0
EM64T
SuSE Linux Enterprise Server 10
SuSE Linux Enterprise Server 10
EM64T
NOTE1. Altos R920 BIOS
FRUSDR
14
(or later) are required to support Windows Server
2008.
NOTE2. This Windows Server 2008 certification also applies to
Standard Edition and Web Server 2008.
NOTE3. EasyBUILD 8.0 build 200 (or later) can support Windows
Server 2008.
The drivers required for the OS installation can be found on
the EasyBUILD 8.0 build 100. We suggest that you use the
drivers contained in the EasyBUILD 8.0 build 100, as these
drivers are tested and qualified by Acer.
There are two ways you can get the drivers. You can either
make diskettes from Resource CD, or put the Resource CD in the
CD-ROM drive and search the driver directly from the Resource
CD.
NOTE. In this section, we assume the OS is installed on the
HDD connected to the integrated SAS hardware RAID.
NOTE. You need an USB floppy for applying driver during OS
installation if there is no built-in driver for disk
controller driver in the OS.
7
Servic
e Pack
n/a
n/a
SP2
SP2
N/A
N/A
SP1
SP1
23
(or later), BMC
Installation Configuration Guide
Status
Note
Certifie
1,
2,
d
3
Certifie
1,
2,
d
3
Certifie
d
Certifie
d
Certifie
d
Certifie
d
Certifie
d
Certifie
d
17
(or later) and
Altos R920
Advertisement
Table of Contents
