Table of Contents
Advertisement
Altos T350 F2 FAQ (Frequently Asked Questions)
12. Onboard Gigabit
1.
What's the onboard Gigabit of Altos T350 F2?
ANSWER: Intel I350 quad port Gigabit Ethernet controller.
More information of Intel I350 Ethernet controller can be found at:
http://www.intel.com/products/ethernet/resource.htm#s1=all&s2=I350&s3=all
2.
What features can Altos T350 F2 onboard Gigabit Support?
ANSWER: Please refer to the table below.
Features
# of ports
Network Teaming
WOL (Wake On LAN)
PXE (Pre-boot eXecution
Environment)
TOE (TCP Offload Engine)
Jumbo Frame
iSCSI
iSCSI Boot
NOTE 1. All ports of onboard Gigabit are connected to CPU1.
NOTE 2. Please refer to iSCSI section for more detail.
3.
Can Altos T350 F2 support network teaming, such as AFT (Adapter Fault Tolerance) and ALB
(Adaptive Load Balance) with onboard Gigabit?
ANSWER: Yes, you can do the network teaming with onboard gigabit by installing PROSet Utility
which is included in Smart Setup DVD.
More information can be found at:
http://www.intel.com/support/network/sb/cs-009747.htm
4.
Is there any BIOS option to enable/disable Altos T350 F2 onboard gigabit?
ANSWER: Yes.
Please enter BIOS Setup during POST.
a.
Please select Advanced.
b.
Please select PCI Configuration.
c.
Please select NIC Configuration
d.
You would see below information:
Onboard NIC1 Controller
Onboard NIC1 Port1
Onboard NIC1 Port2
Onboard NIC1 Port1 PXE
Onboard NIC1 Port2 PXE
Onboard Gigabit
4
1
Yes
Yes
Yes
n/a
9.5 KB
Yes
2
Yes
2
33
NOTE
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Hide quick links:
Advertisement
Table of Contents
