Isns Cloud Discovery; About Cloud Discovery - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Chapter 42 Configuring iSCSI
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Use the show iscsi global config command to display information about import targets (see
Example 42-43
Example 42-43 Displays the Import Target Settings for the Specified Switch
switch# show isns iscsi global config switch 20:00:00:05:ec:01:04:00
iSCSI Global configuration:
Switch: 20:00:00:05:ec:01:04:00 iSCSI Auto Import: Enabled
Example 42-44 Displays the Import Target Settings for All Switches
switch# show isns iscsi global config all
iSCSI Global configuration:
Switch: 20:00:44:0d:ec:01:02:40 iSCSI Auto Import: Enabled
Use the show cfs peers command to display CFS peers switch information about the iSNS application
(see
Example 42-45 Displays the CFS Peer Switch Information for the iSNS Application
switch# show cfs peers name isns
Scope
--------------------------------------------------
Switch WWN
--------------------------------------------------
20:00:00:00:ec:01:00:40
Total number of entries = 1

iSNS Cloud Discovery

You can configure iSNS cloud discovery to automate the process of discovering iSNS servers in the IP
network.
This section includes the following topics:
•
•
•
•
•

About Cloud Discovery

iSNS Cloud Discovery is not supported on the Cisco Fabric Switch for IBM BladeCenter and Cisco
Note
Fabric Switch for HP c-Class BladeSystem.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
and Example 42-44).
Example 42-45).
: Physical
IP Address
10.10.100.11
About Cloud Discovery, page 42-93
Configuring iSNS Cloud Discovery, page 42-94
Verifying Cloud Discovery Status, page 42-96
Verifying Cloud Discovery Membership, page 42-96
Displaying Cloud Discovery Statistics, page 42-96
[Local]
Cisco MDS 9000 Family CLI Configuration Guide
iSNS Cloud Discovery
42-93