HP Cisco MDS 9020 - Fabric Switch Configuration Manual page 1295

Chapter 54 Configuring Call Home
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 54-7 Inventory Event Message Format
Data Item Description
(Plain text and XML) (Plain text and XML)
Time stamp Date and time stamp of event in ISO time notation:
YYYY-MM-DDTHH:MM:SS.
Note
Message name Name of message. Specifically "Inventory Update" Specific event
names are listed in the
Message type Specifically "Inventory Update".
Message group Specifically "proactive".
Severity level Severity level of inventory event is level 2
Source ID Product type for routing at Cisco. Specifically "MDS 9000"
Device ID Unique Device Identifier (UDI) for end device generating message.
This field should empty if the message is non-specific to a fabric switch.
Format: type@Sid@serial, where
•
•
•
•
Example: DS-C9509@C@12345678
Customer ID Optional user-configurable field used for contact info or other ID by any
support service.
Contract ID Optional user-configurable field used for contact info or other ID by any
support service.
Site ID Optional user-configurable field, can be used for Cisco-supplied site ID
or other data meaningful to alternate support service.
Server ID If the message is generated from the fabric switch, it is the Unique
device identifier (UDI) of the switch.
Format: type@Sid@serial, where
•
•
•
•
Example: DS-C9509@C@12345678
Message description Short text describing the error.
Device name Node that experienced the event.
Contact name Name of person to contact for issues associated with the node
experiencing the event.
Contact e-mail E-mail address of person identified as contact for this unit.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
The time zone or daylight savings time (DST) offset from UTC
has already been added or subtracted. T is the hardcoded limiter
for the time.
"Event Triggers" section on page
type is the product model number from backplane SEEPROM.
@ is a separator character.
Sid is "C," identifying the serial ID as a chassis serial number·
serial is the number identified by the Sid field.
type is the product model number from backplane SEEPROM.
@ is a separator character.
Sid is "C," identifying the serial ID as a chassis serial number·
serial is the number identified by the Sid field.
54-21.
(seeTable 54-4).
Cisco MDS 9000 Family CLI Configuration Guide
Message Contents
XML Tag
(XML only)
/mml/header/time
/mml/header/name
/mml/header/type
/mml/header/group
/mml/header/level
/mml/header/source
/mml/ header /deviceId
/mml/ header /customerID
/mml/ header /contractId
/mml/ header /siteId
/mml/header/serverId
/mml/body/msgDesc
/mml/body/sysName
/mml/body/sysContact
/mml/body/sysContactEmail
54-27