HP Cisco MDS 9020 - Fabric Switch Configuration Manual page 1329

Cisco mds 9000 family cli configuration guide, release 3.x (ol-16184-01, april 2008)
Hide thumbs Also See for Cisco MDS 9020 - Fabric Switch:
Table of Contents

Advertisement

Chapter 57
Configuring Port Tracking
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Beacon is turned off
Port tracked with interface fc1/2 (down)
Port tracked with interface port-channel 1 vsan 2 (down)
Port tracked with interface fcip1 (down)
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
Example 57-3 Displays a Tracked Port Configuration for a PortChannel Interface
switch# show interface port-channel 1
port-channel 1 is down (No operational members)
Hardware is Fibre Channel
Port WWN is 24:01:00:05:30:00:0d:de
Admin port mode is auto, trunk mode is on
Port vsan is 2
Linked to 1 port(s)
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
No members
Example 57-4 Displays a Forced Shutdown Configuration
switch# show interface fc 1/5
fc1/5 is up
Hardware is Fibre Channel, FCOT is short wave laser
Port WWN is 20:05:00:05:30:00:47:9e
Admin port mode is F
Port mode is F, FCID is 0x710005
Port vsan is 1
Speed is 1 Gbps
Transmit B2B Credit is 64
Receive B2B Credit is 16
Receive data field Size is 2112
Beacon is turned off
Port track mode is force_shut
OL-16184-01, Cisco MDS SAN-OS Release 3.x
1 frames input, 128 bytes
0 discards, 0 errors
0 CRC,
0 unknown class
0 too long, 0 too short
1 frames output, 128 bytes
0 discards, 0 errors
0 input OLS, 0 LRR, 0 NOS, 0 loop inits
0 output OLS, 0 LRR, 0 NOS, 0 loop inits
0 receive B2B credit remaining
0 transmit B2B credit remaining
Port linked to interface fc1/1
0 frames input, 0 bytes
0 discards, 0 errors
0 CRC,
0 unknown class
0 too long, 0 too short
0 frames output, 0 bytes
0 discards, 0 errors
0 input OLS, 0 LRR, 0 NOS, 0 loop inits
0 output OLS, 0 LRR, 0 NOS, 0 loop inits
<--this port remains shut even if the tracked port is back up
Cisco MDS 9000 Family CLI Configuration Guide
Displaying Port Tracking Information
57-7

Advertisement

Table of Contents
loading

Table of Contents