Renaming Data - Brother BE-1204B Instruction Manual

Chapter 4 Selecting and Transferring Embroidery Data

Renaming Data

Renames the registered embroidery data.
! Data name consists of the name area and three characters called "extension" which indicates data
type. Enter ".ECS" at the end of the data name.
! Upper and lower cases are not distinguished in the data name.
1. Click data for selection.
The frame of selected data turns red.
2. Select [Rename] from Edit menu or click
3. Enter a new data name.
Enter a data name including extension.
4. Click [OK].
4-12
extension
.
W0982Q
BE-1204B-BC • BE-1206B-BC
W0663Q