Thin / Thick Material - Brother BE-1204B Instruction Manual

Thin / Thick Material

Adjusts the timing of needle drop and hoop movement.
! The value can be designated between 95 and 125 degrees (85 and 115 degrees for cap frame) in
units of 1 degree.
suitable for thin material.
1. Select [Thin / Thick material] from Settings menu.
W1140Q
2. Adjust the value by moving the slide bar control. Click [OK] when it is set.
The smaller values are suitable for thick material and the larger ones are
BE-1204B-BC • BE-1206B-BC
The selected value is displayed.
Clicking this button will reset the
value to the standard one (110 (100
for cap frame)).
W1141Q
Chapter 6 Embroidering
6-39