Chapter 2 Preparation of Embroidery Machine
2-5 Mounting of Cotton Stand
Front
1.
Attach the cotton stand bars [2] to the cotton stand [1].
2.
Attach six thread guide support bars [3] to the cotton stand [1], while fitting into the six holes.
3.
Mount the thread guide assembly [4] on the thread guide support bars [3] using the six screws [5].
• When mounting, use one flat washer [6] below the thread guide support bar [3].
• Pay careful attention to the front and back directions of the thread guides (A, B, C).
2-10
[1]
[2]
BE-1204B-BC • BE-1206B-BC
Thread guide A
Thread guide B
Thread guide C
[5]
[3]
[6]
[4]
W1229Q