Adjust - Brother BE-1204B Instruction Manual

Chapter 6 Embroidering
2. Click [OK] when the items are set.
Manually trim the lower thread immediately after resetting a thread breakage error if feeding by stitch
back is long (i.e., 40 to 50 mm or more) when "After the end of mending" is set to "Non stop".
Set "When the machine is stopped" to "Trim lower theread only".

Adjust

Adjustment value of the needle is set.
! The adjustment value is set at the increment of 0.1 mm.
! The setting range is -0.5 ~ 2 mm in X and Y directions.
1. Select [Adjust] from Settings menu.
W1133Q
2. When setting is complete, click [OK].
6-36
W1132Q
W1134Q
BE-1204B-BC • BE-1206B-BC