Insert Or Delete Code - Brother BE-1204B Instruction Manual

Insert or Delete Code

Codes of trim, pause and color change can be inserted or deleted by moving the needle to the
desired position.
1. Select [Insert or delete code] from the Edit menu.
Needle movement tool bar is displayed.
1 step
10 step
100 step
Next (previous) color
change point
Next (previous) feed point
Next (previous) trim code
Next (previous) pause code
2. Select the movement method of needle position.
Click either of the following buttons:
1 step
10 step
100 step
Next (previous) color change point
Next (previous) feed point
Next (previous) trim code
Next (previous) pause code
3. Move the needle position to the desired position.
Click either of the following buttons:
Consecutive step backward specified
Step backward specified
Stop
Step forward specified
Consecutive step forward
specified
Number
4. Insert or delete the code.
Click either of the following buttons:
Insert (delete) trim code
Insert (delete) pause code
Insert (delete) change color code
5. To end code insertion or deletion, click
To cancel the modification of setting, click
Step forward specified
Stop
Step backward specified
Consecutive step backward specified
Moves the needle position by 1 step each.
Moves the needle position by 10 step each.
Moves the needle position by 100 step each.
Moves the needle position to the next (previous) color change point.
Moves the needle position to the next (previous) feed point.
Moves the needle position to the next (previous) trim code.
Moves the needle position to the next (previous) pause code.
The needle position returns consecutively until the "Stop" button is pressed.
The needle position returns for the specified length.
The needle position stops movement.
The needle position moves forward for the specified length.
The needle position moves forward consecutively until the "Stop"
button is pressed.
Move the needle directly to the indicated position.
Insert (or delete) the trim code at the current needle position.
Insert (or delete) the pause code at the current needle position.
Insert (or delete) the change color code at the current needle position.
. Modified setting is saved.
.
BE-1204B-BC • BE-1206B-BC
Chapter 5 Editing Embroidery Data
Insert (delete) change
color code
Insert (delete) pause code
Insert (delete) trim code
Move to the indicated position.
Consecutive step forward specified
W1039Q
5-21