Adjusting Needle Bar Height - Brother BE-1204B Instruction Manual

Chapter 10 Adjustment
Turn off the power switch and pull out the plug
before starting adjustment. Failure to do so
may start the machine unintentionally through
an accidental activation of the START switch,
resulting in bodily injuries.
• Adjustment

1. Adjusting Needle Bar Height

[1]
W1306Q
10-2
CAUTION
W1304Q
[5]
[4]
[6]
W1296Q
BE-1204B-BC • BE-1206B-BC
If adjustment should be made while the power
switch is turned on, pay special attention to your
safety.
Maintenance and inspection of the machine
should be conducted only by trained engineers.
[5]
[4]
[6]
[2]
[3]
11.3mm
W1305Q
Tighten the
bolt [6] so that
the clearance
can be even.
[7]
Do not hit
this section.
[7]
W1307Q