Functions (Command Reference) - Brother BE-1204B Instruction Manual

Chapter 5 Editing Embroidery Data

Functions (Command Reference)

File menu
Open
Merge
Save
Save as
Print
Print Preview
Print Setup
Exit Editing
Edit menu
Undo
Redo
Rotate
Horizontal Flip
Vertical Flip
Point Symmetry
Repeat
Resize
Delete Stitch
Insert or delete code
Insert lock stitch
Change menu
Start
End
Mask
Group
View menu
Centering
Zoom
Needle Penetration
Embroidering Start/End
Trim and pause
5-2
Selects embroidery data. (→ page 5-5)
Add other pattern to the pattern in editing. (→ page 5-28)
Saves the edited embroidery data over the current file. (→ page 5-30)
Saves the edited embroidery data as a separate file. (→ page 5-31)
Prints embroidery data. (→ page 5-33)
Views printing condition of embroidery data.
Designates printer settings.
Exits from editing of embroidery data.
Returns to the previous step. (→ page 5-15)
Repeats the step of "Undo". (→ page 5-15)
Rotates the image. (→ page 5-16)
Flips the image horizontally. (→ page 5-17)
Flips the image vertically. (→ page 5-17)
Rotates the image 180 degrees about the center. (→ page 5-17)
Repeats copying of the image. (→ page 5-17)
Resizes the image. (→ page 5-20)
Delete a stitch whose length is the designated length or less. (→ page 5-20)
Insert or delete the code for trim, pause and color change. (→ page 5-21)
Insert a lock stitch before and after thread trimming. (→ page 5-22)
Changes the start position of embroidery data. (→ page 5-23)
Changes the end position of embroidery data. (→ page 5-24)
Changes the mask of embroidery data. (→ page 5-25)
Group the patterns created in "Repeat" into one. (→ page 5-26)
Centers embroidery data. (→ page 5-6)
Zooms in or out. (→ page 5-6)
Displays the needle penetration positions. (→ page 5-8)
Displays the start/end positions of embroidering. (→ page 5-8)
Displays the code insertion position for trim and pause. (→ page 5-8)
BE-1204B-BC • BE-1206B-BC