Hoop Feed Position - Brother BE-1204B Instruction Manual

Chapter 6 Embroidering

Hoop Feed Position

Set the basic position of the hoop (hoop feed position) for cancellation of embroidering.
! The hoop feed position can be set only in the embroidering area surrounded by a red frame.
! The hoop feed position can not be set in the upper side of the frame when [Tubular] is selected in
[Embroidery hoop] and the frame is displayed on the screen.
1. Select [Hoop Feed Position] from Settings menu.
2. Click the point to feed the hoop.
3. The gray cross appears and shows the hoop feed position.
6-28
Hood feed position
W1114Q
W1115Q
BE-1204B-BC • BE-1206B-BC