Chapter 12 Troubleshooting
Personal Computer Section
Trouble
! The power lamp does not light up
when the computer power switch is
turned on.
! The display does not light up when the
computer power switch is turned on.
! "Windows" cannot be started.
! "Windows" can be started but the
embroidery software cannot.
! The window does not open though the
machine power is turned on?
! The screen changes when the mouse
is not operated for a while.
! The screen of the editor,the explorer or
the production report disappears
during operation.
! Colors set for a design and threads are
not available.
12-8
•
Is the cable correctly plugged in the
computer?
•
Is the AC line live?
•
Is the display power lamp on?
•
Is the display's cable correctly connected?
•
Is the display's contrast correctly adjusted?
•
Is a floppy disk inserted?
•
Is the selection of other icons possible?
•
Is the selected icon correct?
•
Can you double-click more quickly?
•
Is the cable to the machine and the
interface board correctly connected?
•
Is the interface board attached
properly?(Refer to Page 2-12.)
•
Is the correct COM port selected?(Refer to
Page 6-7.)
•
The screen saver is preset.Invalidate this
function on the control panel screen.Do not
validate the power-saving function.
•
The machine controller screen was clicked
so that the current screen is hidden behind
it.Move the mouse to the bottom of the
screen and select the program
(editor,explorer,or production report).
•
The number of colors is set to 256.Increase
the number to 65000 or more on the control
panel screen.
BE-1204B-BC • BE-1206B-BC
Check Point