Oiling; Head - Brother BE-1204B Instruction Manual

Chapter 9 Maintenance

2. Oiling

Supply oil to the following places at regular intervals.
• When oiling, be sure to supply
the dropper.
* If this type of lubricating oil is difficult to obtain, the recommended oil to use is <Exxon Mobil Essotex
SM10; VG10>.
• Excessive oiling may cause the material to be stained.
• Be sure to wipe off excessive oils with waste cloth etc.

2-1 Head

! Supply one or two drops of oil to each needle bar from the oil supply hole of the lower cover daily.
! Lubricate the felt on the top surface of the head once a week.
9-4
Brother's specified oil (Nippon Oil, Embroidery Lube 10N; VG10)
BE-1204B-BC • BE-1204C-BC • BE-1206B-BC
W1221Q
Felt
W1291Q
using