Chapter 6 Embroidering
4. Click [OK].
The data, is copied.
Configuration
Sets the environment of data reading and display.
1.
Select [Configuration] from Tool menu.
2.
Click and select the item for setting.
[When reading file, Micro Stitch is eliminated.] is set to be deleted in default status (checked).
3.
Click [OK].
Upgrading the Machine Program
Upgrades the programs at each part of the machine.
This function is protected by a password. A dealer engineer will use this function if required.
6-24
W1105Q
W1106Q
Click here to the default setting.
W1107Q
BE-1204B-BC • BE-1206B-BC