Mending - Brother BE-1204B Instruction Manual

Chapter 7 Operation of Machine

4-2 Mending

In case that a head stops for some reasons such as thread breakage, only the stopped head will retry
sewing by specified number of stitches when the head is recovered, and after that, all the heads will
restart normal sewing.
Thread tension stand lamp
This function works in the following procedure:
1. In case of an error such as thread breakage, the thread tension stand lamp blinks red and the
sewing will be stopped. The other thread tension stand lamps with other heads illuminate green.
2. The head with the error will restart sewing from specified position.
Heads with no thread breakage are suspended during that period.
3. When the stitches reach the position of the thread breakage, all the heads will restart the sewing.
However, heads already set to suspension are excluded.
7-6
Thread tension stand switch
BE-1204B-BC • BE-1206B-BC
W1258Q