Chapter 4 Selecting and Transferring Embroidery Data
Reading Data in Paper Tape
Saves data in paper tape as embroidery data.
! Paper taper reader is required for reading data.
! Before saving any data, check that the paper tape reader is connected to PC correctly.
! Available interfaces are as follows:
• COM1
• COM2
! Readable data formats of paper tape are as follows:
• Tajima
• Barudan
• Zanks (ZSK)
1.
Turn on the power to the paper tape reader.
2.
Set paper tape after the LED of READ button light up.
Select [Tape → ECS Conversion] from Tool menu.
3.
4.
Select data format and click [OK].
The paper tape reader starts reading data.
4-22
Power switch
READ button
Paper tape
W0996Q
BE-1204B-BC • BE-1206B-BC
W0414Q