Renaming Data - Brother BES-1260BC Instruction Manual

Chapter 4 Selecting and Transferring Embroidery Data

Renaming Data

Renames the registered embroidery data.
1.
2.
3.
4.
76
Data name consists of the name area and three characters called "extension"
which indicates data type. Enter ".ECS" at the end of the data name.
Upper and lower cases are not distinguished in the data name.
Click data for selection.
The frame of selected data turns red.
Select [Rename] from Edit menu or click
Enter a new data name.
Enter a data name including extension.
Click [OK].
BES-960BC BES-1260BC
extension
.