Sewing On Very Thin Material; Removing The Material From The Machine - Brother VX-1120 Operation Manual

Removing the Materiel from the Machine
1. Stoo the machine.
2. Turn the balance wheel toward you
tcounterc_eckwise) to bring the needle and thread
take-up Lever to their highest position,
3. Lift the _resser foot and pull the fabric out gently
to the left side.
4. Cut both threads using the thread cut_:er located
on the back of the presser foot bar_
0 Thread cutter
5, TO prepare the machine for the next seam, pull
about 10 em (4") of _.hreedthrough the toes of the
presser foot toward the beck of the machine.
Para retirar el tejido de te m_quina
1. Par_ Is maquina.
2. Gire la ruedecitta bahia usfed (an el see#do
contrario ai de tas manes!lies de un re!or) pare
tevantar la aguJa y le patanea tirahites a su mas
alta poaioi&n,
3. Levante e! prensatelas y saque suavemente el
tejido pofla Jzquierda.
4. Carla ambos hilos usaedo e! cortador qua se
encuentra detras de la barfs de! prensatelas,
O_Cortader d_ h#os
5, Can e! fin de deist la m_quina preparada pare la
pr6xlma coatura t_re unos 10 cm (4") de/bile
tetedo_ y p_selo per los aalientes det prensatetas
hacia ta patTe posterior de ta m_qu_na.
An underlay of thin pa_r wi!l act as a stablizer and
will help to elim{nate skipped stitches and fabric
puckering when sewing on very thin material
Un papal delgado abajo de la teta le permit!re
estab#izaria y le ayudar_ a evitar puntadas saltadas
o fruncidos auande ease en tejidos muy fines,