Tools; Screw List - Epson Stylus Pro 9000 - Print Engine Service Manual

EPSON Stylus Pro 9000

4.1.2 Tools

This section lists the tools necessary to disassemble or assemble the printer.
Table 4-1. Necessary Tools
Tool Part Code
(+) Phillips screwdriver
(-) Standard screwdriver
Needle-nosed pliers
Regular, every-day
Tweezers
tools are OK, no
special tools needed
Hex (Allen) wrench

4.1.3 Screw List

The following table lists all the screws used in this printer.
Table 4-2. Screws
Type Color
CP(W2)M3x6 black (+) Crosshead Pan, spring washer, flat washer
CP(W2)M4x12 silver (+) Crosshead Pan, spring washer, flat washer
CP(W2)M4x6 silver (+) Crosshead Pan, spring washer, flat washer
CP(W2)M4x12 black (+) Crosshead Pan, spring washer, flat washer
CP(W2)M3x8 silver (+) Crosshead Pan, spring washer, flat washer
CP(W2)M3x6 silver (+) Crosshead Pan, spring washer, flat washer
CP(W2)M4x5 silver (+) Crosshead Pan, spring washer, flat washer
CBF3x6 silver (+) Bind screw, flange
CPM2x4 silver (+) Crosshead Pan
CBM3x6 silver (+) Bind screw
Hex screw silver Six-sided hex screw, 1.5 and 2.5 mm
Disassembly & Assembly
Notes
No. 1 and no. 2 sizes needed
—
—
—
• 1.5 mm (CR motor)
• 2.5 mm (PF motor and CR
belt)
• 4.0 and 5.0 mm for setting up
printer only
Description
56