Order Of Disassembly - Epson Stylus Pro 9000 - Print Engine Service Manual

EPSON Stylus Pro 9000

4.1.4 Order of Disassembly

For efficient disassembly and assembly, refer to the following flowchart.
on
Maintenance Cover Removal
page 58
on page 70
Top Cover Removal
Upper Paper Guide Removal
page 64
Left and Right Side Cover
Removal on page 60
Front Cover Removal
Roll Cover Removal
Lower Paper Guide Removal
page 63
Replacing the Waste Ink Pads
page 67
Removing the Front Paper Sensor
on page 81
Disassembly & Assembly
on
on page 61
on page 62
on
on
To access these
parts, you need to
remove only the
Right Side Cover
Figure 4-1. Disassembly Process Flowchart
Power Supply Board Removal
page 65
Main Board Removal on page 66
Removing the Rear Paper Sensor
on page 80
Removing the Carriage Motor
Assembly on page 75
Removing the Platen Gap
Adjustment motor on page 78
Removing the Platen Gap Home
on page 78
Position Sensor
Removing the Paper Thickness
on page 80
Sensor
Removing the Paper Release
Sensor on page 81
Removing the Carriage Home
Position Sensor and Encoder
page 82
Replacing the Printheads
on
page 71
Removing the Cover open
Sensors on page 79
To access the Left I/L Switch, you also
need to remove the Upper Paper Guide
Removing the PF Motor Assembly
on page 76
To access the PF Motor, you also need
to remove the Lower Paper Guide
Maintenance Assembly Removal
& Disassembly on page 69
To access the Maintenance Assembly,
you also need to remove the Lower
Paper Guide and Right Waste Ink Box
on
on
57