Overview; Cautions; Service Tools - Epson ACULASER COLOR 2000 Service Manual

EPSON AcuLaser C2000 / AcuLaser C1000

4.1 Overview

This chapter describes disassembly/assembly of the AcuLaser C2000 /
AcuLaser C1000.

4.1.1 Cautions

Read the following caution before disassembling the printer.
Caution on disassembling/ adjusting the printer.
Be sure to turn the printer power off and disconnect the
W A R N I N G
power cable from the AC socket.
Since the printer weighs 44.5kg, including the optional
units, be sure to carry it with 2 people.
When servicing parts around the fuser, make sure the
fuser and adjacent parts are cool enough.
Before printing, check that all printer parts are installed.
If you need to operate the printer before reassembling,
note the points below:
1.Be careful not to get you hand or clothes caught in the
rotating parts such as rollers and cooling fan.
2.Never touch the components in the electrical circuit or
high voltage circuit.
Disassembly and Assembly
Caution on lithium battery replacement
When replacing the old lithium battery with a new one, be
C A U T I O N
sure to use the one that is specified by the parts list or
equivalent.
When installing the new battery, be sure to set it correctly
paying attention to its polarity.
Be suer to dispose of the old battery according to the local
regulations.
Do not throw away the old battery to the personal land.

4.1.2 Service Tools

Name
Phillips Screwdriver
(No.1)
Phillips Screwdriver
(No.2)
Standard Screwdriver
Tweezers
Pliers
Overview
Availability Part Code
Commercially available B743800100
Commercially available B743800200
Commercially available B74300100
Commercially available B64100100
Commercially available B740400100
Revision E
139