Overview; Tools - Epson SC-P600 Service Manual

SC-P600

1.1 Overview

This chapter describes procedures for disassembling the main parts/units of Stylus Photo R3000. Unless
otherwise specified, disassembled parts/units can be reassembled by reversing the disassembly procedure. See
the cautions or tips for disassembly/reassembly described in
for each Part/Unit
Read the "Safety Precautions (p3)"
When you have to remove units or parts that are not described in this chapter, see the exploded diagrams of SPI
(Service Parts Information).
This warning is for Taiwan.

1.1.1 Tools

Use only specified tools to avoid damaging the printer.
(+) Phillips screwdriver #1
(+) Phillips screwdriver #2
Flathead screwdriver
Flathead Precision screwdriver #1
Tweezers
Longnose pliers
Acetate tape
Nippers
Note *1: Some of the tools listed above are commercially available.
*2: EPSON provides the tools listed with EPSON part code.
Bring back the following brought and used items, then dispose of them based on the local
regulations in your country, please.
 Ink cartridges
 Cleaning cartridges
 Draining cartridges
Especially in case of ink cartridges in Europe, please refer to the following web site to
confirm the regulation in detail.
ECO Info: http://www.epson.eu/weee (available from July 2015)
Disassembly/Reassembly
(p19)".
before disassembling and reassembling.
Name
"1.3 Detailed Disassembly/Reassembly Procedure
*1
Availability
O
O
O
O
O
O
---
O
Overview
SE Group Confidential (Related Staff Only)
Revision D
*2
EPSON Part Code
1080530
---
---
---
---
---
1003963
---
9