Cap Position Adjustment - Epson Stylus Pro 9000 - Print Engine Service Manual

EPSON Stylus Pro 9000
[SelecType]
Adj Cap Position
Adj Check Skew
Adj Input Rank
Adj Check Nozzle
Adj B Head Slant
Adj C Head Slant
Adj BC Head Slant
Adj Head LR Adj
Adj Flush Point R
Adj Flush Point L
Adj Top & Bottom
Adj Rear Sensor
Adj Test Print
Adj Clean Head
Adj Counter Clear
Figure 5-4. Adjustment Menu
Adjustments
[Paper
Source]
Adj Bi-D
Adj Feed

CAP POSITION ADJUSTMENT

Use this function to automatically check and update the capping position as
stored in printer's memory.
1. Make sure "Adj Cap Position" appears on the LCD and press the Enter
button.
2. The printer begins the HP detection sequence and automatically detects
the capping position.
3. After the adjustment process is finished, the detected distance between
the HP and the capping position is displayed.
4. Pressing the Enter button updates the capping position parameter and
displays the next menu item. Pressing the Pause button does not update
the capping position parameter and returns you to the beginning of this
function; Adj Cap Position appears on the LCD.
Detecting Origin
Detecting Cap Position
Carriage moves to capping position, and
position appears on LCD.
Position: -0.2500mm
After detecting
the HP, the
printer
automatically
determines the
capping position
116