EPSON Stylus Pro 9000
4.1.5 Housing Parts
Refer to the figure below to locate the housing parts described throughout this
chapter.
Roll Cover
Top Cover
Left Side
Cover
Front Cover
Figure 4-2. Housing Parts
Disassembly & Assembly
Upper Paper Guide
(behind Top Cover)
Right Side
Cover
Right Joint
Cover
Maintenance
Cover
Lower Paper Guide
4.2 Housing Removal
Follow the steps below to remove the printer's housing.
MAINTENANCE COVER REMOVAL
1. Open the Front Cover.
2. Remove 2 screws, CP(W2) M3x6, and then remove the Maintenance
Cover.
CP(W2) M3x6 screw (x2)
Figure 4-3. Maintenance Cover Removal
58