Epson Stylus Pro 9000 - Print Engine Service Manual page 72

EPSON Stylus Pro 9000
1. Turn the ink valve knob located on the sides of the Ink Cartridge Holders to
the "Close" position, or depress and then lift up the I/C Holder levers. Both
operations perform the same function of shutting off the flow of ink from the
ink cartridges.
2. Manually release the Carriage Lock by pulling up on the release lever as
shown below, and then move the carriage away from the capping position.
Carriage Lock Release
Figure 4-24. Carriage Lock Release
Disassembly & Assembly
3. Remove two screws (CB M3x6) as shown below, and remove the carriage
cover.
CB M3x6 screw
Figure 4-25. Carriage Cover Removal
72