Table of Contents
Advertisement
Downloading Fonts and Macros
FSDOWNLOAD
Command
@PJL FSDOWNLOAD FORMAT:BINARY [SIZE=int] [NAME = "pathname"] [<CR>] <LF>
Syntax
<binary data><ESC>%-12345X
Parameters
Parameter
SIZE=integer
NAME="pathname"
SIZE = integer — The size variable indicates the number of bytes in the file to be
downloaded. The size indicates the number of bytes immediately following the <LF> to
the next UEL command.
NAME = "pathname" — where "pathname" = 0:\PCL\FONTS\<fontname> to
download a font named "fontname" to the DocuPrint NC60 or =
0:\PCL\MACROS\<macroname> to download a macro named "macroname" to the
DocuPrint NC60. "Fontname/macroname" can be any combination of up to 512
alphanumeric characters.
<binary data> — This is the binary file data to be downloaded, such as font files and
macro data.
3-4
DocuPrint NC60 System Administrator Guide
The FSDOWNLOAD command is used to download fonts
or macros to the DocuPrint NC60 file system. If a file with
the same name exists, the downloaded file overwrites it.
Use of 1 rather than 0 in the "pathname" will download the font or macro to RAM
rather than to the hard drive.
Functional Range
31
0 to 2
- 1
ASCII 01 thru 255
Default
N/A
N/A
Advertisement
Table of Contents
Troubleshooting
