Xerox DocuPrint NC60 Administrator's Manual page 72

Ethernet Menu
Table 1.15 Ethernet Menu functions (continued)
Menu Item and Function
Subnet Mask
Set the four byte Subnet Mask
address.
The available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
For this item (after Step 3), Item Up
moves the cursor to the right through
the displayed Subnet Mask address
and Item Down moves the cursor to
the left. This allows you to change
characters within the string rather
than having to reenter the entire
string.
This item appears only if
IP Address Res is set to Static.
1-66 DocuPrint NC60 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down.
You will see:
4. Press Value Up or Value Down
to change the value of the
character above the cursor. The
value is incremented or
decremented by 1 each time
the key is pressed. Holding
down Value Up or Value
Down causes continuous
scrolling through the values.
5. To change other characters in
the Subnet Mask address, press
Item Up or Item Down to
scroll right or left respectively
through the character string,
then press Value Up or Value
Down to change the value of
the character above the cursor
(as in Step 4).
6. When you have completed
setting the Subnet Mask
address, press Enter. You will
see:
7. Press Online. You will see:
8. Restart printer or power off/on.
Display
Menus
Ethernet Menu
Ethernet Menu
Subnet Mask
Subnet Mask
xxx.xxx.xxx.xxx
Subnet Mask
xxx.xxx.xxx.xxx
Subnet Mask
xxx.xxx.xxx.xxx
Ethernet Menu
Subnet Mask
Ready
Table 1.15 Page 8 of 10
=
=
=