Xerox DocuPrint NC60 Administrator's Manual page 127

<ESC>%-12345X @PJL<CR><LF>
@PJL FSDOWNLOAD FORMAT:BINARY NAME ="0:\pcl\macros\a_macro" SIZE=29<CR><LF>
<ESC>*p900x1500YThis is the macro <ESC>%-12345X
<ESC>&n8W<HEX'04'>a_macro<CR,LF>
<ESC>&n8W<HEX'05'>a_macro<CR,LF>
<ESC>&f<HEX'02'>x<CR,LF>
Download Macro
The following is a sequence of commands that can be sent
to the DocuPrint NC60 to download a macro to the disk.
In this example:
• <ESC>%-12345X is the PJL UEL command which starts
this sequence.
• @PJL<CR><LF> is the mandatory PJL command
following the UEL command.
• @PJL FSDOWNLOAD... downloads a macro of 29 bytes
named "a_macro."
• The phrase "This is the macro" is positioned at x=900
and y=1500 by this macro.
• <ESC>%-12345X is the UEL command which ends this
sequence.
Executing this macro requires the following PCL
sequence:
Notes:
1. The macro ID must be the same case as in the original
download command.
2. The byte count (after the "n" and before the "w")
must equal the ID byte count plus 1.
Downloading Fonts and Macros
Sets the current macro ID to the
string ID "a_macro"
Associates the current macro ID with
the supplied string ID
Executes this macro
Chapter 3: Using the Hard Drive 3-5