Table of Contents
Advertisement
Table 1.21 Reset Menu functions (continued)
Menu Item and Function
CRU Resets
Reset the selected CRU.
The available values are:
COLOR DEV
FUSER MOD
BLACK DEV
PRINT DRUM
Restart Printer
Re-boot the printer as if the power
was cycled, but bypassing power on
diagnostics.
The available values are:
Yes
No*
This action does not remove the Reset
Menu. To do so, power off/on the
printer.
Delete All Jobs
Delete all secure or proof jobs from
the disk.
The available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. When the action is complete,
you will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. When the action is complete,
you will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. When the action is complete,
you will see:
Chapter 1: Configuring the Printer
Reset Menu
Display
Menus
Reset Menu
Reset Menu
CRU Resets
CRU Resets
Yes
CRU Resets
Please Wait
Ready
Menus
Job Menu
Job Menu
Restart Printer
Restart Printer
Yes
[Startup Messages]
Ready
Menus
Reset Menu
Reset Menu
Delete All Jobs
Delete All Jobs
Yes
Delete All Jobs
Please Wait
Ready
Table 1.21 Page 2 of 3
1-111
Advertisement
Table of Contents
Troubleshooting
