Xerox DocuPrint NC60 Administrator's Manual page 94

Novell Menu
Table 1.17 Novell Menu functions (continued)
Menu Item and Function
Primary Server
Set the name of the Primary file server
(a name of 1 to 47 characters in
length).
The available values are:
A - Z, 0 - 9, hyphen (-) and underscore (_)
Null*
For this item (after Step 3), Item Up
moves the cursor to the right through
the displayed Primary Server name
and Item Down moves the cursor to
the left. This allows you to change
characters within the string rather
than having to reenter the entire
string.
With the cursor displayed under a
character, Value Up increments the
value of that character and Value
Down decrements the value.
1-88 DocuPrint NC60 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down.
You will see:
4. Press Value Up or Value Down
to change the value of the
character above the cursor. The
value is incremented or
decremented by 1 each time
the key is pressed. Holding
down Value Up or Value
Down causes continuous
scrolling through the values.
5. To change other characters in
the Primary Server name, press
Item Up or Item Down to
scroll right or left respectively
through the character string,
then press Value Up or Value
Down to change the value of
the character above the cursor
(as in Step 4).
6. When you have completed
setting the Primary Server
name, press Enter. You will see:
7. Press Online. You will see:
Display
Menus
Novell Menu
Novell Menu
Primary Server
Primary Server =
xxx...xxx
Primary Server =
xxx...xxx
Primary Server =
xxx...xxx
Novell Menu
Primary Server
Ready
Table 1.17 Page 5 of 7