Table of Contents
Advertisement
Table 1.10 System Menu functions (continued)
Menu Item and Function
Page Policy
Allow the printer to automatically
select an alternate paper size and/or
type if the requested size and/or type
is not loaded.
The available values are:
Ignore Size
Ignore Type
Ignore Size/Type
Off*
If the requested paper (size/type) is
not installed, you will be prompted to
load the requested paper. If the Page
Policy is Off or the Page Policy does
not satisfy the request, the printer will
wait indefinitely until one of the
following actions is taken:
• The job is cancelled from the
Control Panel.
• From the Control Panel, Value Up
or Value Down is pressed to select
an alternative tray to print from and
then Enter is pressed.
• A sheet of paper of any size or type
is inserted into the Manual Bypass
Feeder slot.
• The proper paper (size/type) is
loaded in the specified tray and the
tray designation for type and size is
corrected. See "Tray Menu"
(page 1-25).
If a Page Policy is set, the printer will
wait a time specified by the Policy
Timeout (page 1-38) before invoking
the Page Policy.
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Chapter 1: Configuring the Printer
System Menu
Display
Menus
System Menu
System Menu
Page Policy
Page Policy
New Value
System Menu
Page Policy
Ready
Table 1.10 Page 3 of 7
=
1-37
Advertisement
Table of Contents
Troubleshooting
