Xerox DocuPrint NC60 Administrator's Manual page 44

System Menu
Table 1.10 System Menu functions (continued)
Menu Item and Function
Policy Timeout
Set how long the printer will wait
before taking the action defined by
the setting of Page Policy (page 1-37).
The available values, in seconds, are:
300
180
120
60
30*
0
Off
0 means immediately invoke Page
Policy. Off means never invoke Page
Policy (i.e., wait indefinitely).
Hold Timeout
Set the length of time a print job is to
be held at the printer when
designated as a Hold Job by the
printer driver.
The available values, in minutes, are:
10
5
4
3
2
1*
Off
The Control Panel display will indicate
"HOLD JOB" and the job filename.
The job will be released by pressing
the Enter key if the Hold Timeout
value has not been reached. If the
timeout value is exceeded, the job will
print.
1-38 DocuPrint NC60 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Display
Menus
System Menu
System Menu
Policy Timeout
Policy Timeout =
New Value
System Menu
Policy Timeout
Ready
Menus
System Menu
System Menu
Hold Timeout
Hold Timeout
New Value
System Menu
Hold Timeout
Ready
Table 1.10 Page 4 of 7
=