Xerox DocuPrint NC60 Administrator's Manual page 71

Table 1.15 Ethernet Menu functions (continued)
Menu Item and Function
IP Address
Set the four byte IP address.
The available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
For this item (after Step 3), Item Up
moves the cursor to the right through
the displayed IP address and Item
Down moves the cursor to the left.
This allows you to change characters
within the string rather than having to
reenter the entire string.
This item appears only if
IP Address Res is set to Static.
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down.
You will see:
4. Press Value Up or Value Down
to change the value of the
character above the cursor. The
value is incremented or
decremented by 1 each time
the key is pressed. Holding
down Value Up or Value
Down causes continuous
scrolling through the values.
5. To change other characters in
the IP address, press Item Up
or Item Down to scroll right or
left respectively through the
character string, then press
Value Up or Value Down to
change the value of the
character above the cursor (as
in Step 4).
6. When you have completed
setting the IP address, press
Enter. You will see:
7. Press Online. You will see:
8. Restart printer or power off/on.
Chapter 1: Configuring the Printer
Ethernet Menu
Display
Menus
Ethernet Menu
Ethernet Menu
IP Address
IP Address
xxx.xxx.xxx.xxx
IP Address
xxx.xxx.xxx.xxx
IP Address
xxx.xxx.xxx.xxx
Ethernet Menu
IP Address
Ready
Table 1.15 Page 7 of 10
=
=
=
1-65