Procedure B - Xerox DocuPrint NC60 Administrator's Manual

Upgrading the Printer Software

Procedure B

4-22 DocuPrint NC60 System Administrator Guide
LPR Upgrade Procedure
Once the upgrade process has begun do not power
off your printer!
1 Print a Configuration Sheet and a Diagnostics Page.
Keep these pages for future reference. For directions on
doing this, refer to Table 1.20 on page 1-101.
2 Send the upgrade file to the printer. Use the format based
on your client operating system:
Windows NT (3.51 & 4.)
lpr -P ps -S <ipaddress> <filename>[RETURN]
OS/2
lpr -p ps -s <ipaddress> <filename>[RETURN]
UNIX (use lp or lpr as appropriate)
lpr <switches><queue><filename> [RETURN]
lp <switches><queue><filename> [RETURN]
Where:
<ipaddress> = the TCP/IP address the printer has been
assigned
<filename> = the path and name of the upgrade file
<queue> = the native queue to which the printer is
assigned
<switches> = use switches as appropriate to your UNIX
environment
3 To see if your upgrade was successful see the section
"Determining a Successful Upgrade" (page 4-20). If
successful, follow the instructions in the section "After the
Upgrade" (page 4-20).