Upgrading The Printer Software - Xerox DocuPrint NC60 Administrator's Manual

Upgrading the Printer Software

Upgrading the Printer Software

Table 4.1 Software on the CD-ROM
Software
Printer Controller
Table 4.2 Software on the Internet
Software
Printer Controller
Printer Controller on WWW
4-16 DocuPrint NC60 System Administrator Guide
The Printer Controller is FLASH ROM equipped. This
means as software fixes and upgrades are available, you
are able to update printer software without a service call.
The current software at the time of manufacture is
provided on the CD-ROM. The path to the software is:
Path to the Software
D\INSTAL\UTILITY\FIRMWARE\PRINTER\(version #).xfc
(version # in the form #_#_#)
In addition the newest software will always be available
on the Internet on both the Xerox ftp and world wide
web sites.
Address
ftp://ftp.xerox.com/pub/nc60/firmware
http://www.xerox.com/drivers
All files are compressed using PKZIP or BinHex/ StuffIt
formats to avoid corruption during transfer.
Self-extracting versions of the files exist for many
platforms. For the other platforms you will need the
appropriate decoding software.