Xerox DocuPrint NC60 Administrator's Manual page 45

Table 1.10 System Menu functions (continued)
Menu Item and Function
Manual Timeout
Set time to force printing of a job
designated by the print driver to use
media fed from the manual feeder. If
media is not inserted into the manual
feeder before timeout, the job will be
printed on the media present based
on printer settings.
The available values, in minutes, are:
10
5
4
3
2
1*
Off
Print Quantity
Set the number of times each page is
printed (uncollated). The setting is
usually overridden by the job stream.
The available values are:
1* - 999
The number of copies changes
incrementally by 1 each time either
Value Up or Value Down is pressed.
Holding down Value Up or Value
Down causes continuous scrolling
through the number of copies.
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Chapter 1: Configuring the Printer
System Menu
Display
Menus
System Menu
System Menu
Manual Timeout
Manual Timeout =
New Value
System Menu
Manual Timeout
Ready
Menus
System Menu
System Menu
Print Quantity
Print Quantity =
New Value
System Menu
Print Quantity
Ready
Table 1.10 Page 5 of 7
1-39