Xerox DocuPrint NC60 Administrator's Manual page 49

Table 1.11 Color Adjust Menu functions
Menu Item and Function
Color Density
Set to allow fine adjustment to the
color density.
The available values are:
+3 CMY
+2 CMY
+1 CMY
0 CMY*
-1 CMY
-2 CMY
-3 CMY
A change to Color Density (i.e.
pressing Enter after a value change)
will cause a test print output, based
upon the changed value.
Black Density
Set to allow fine adjustment of the
black density.
The available values are:
+3 K
+2 K
+1 K
0 K*
-1 K
-2 K
-3 K
A change to Black Density (i.e.
pressing Enter after a value change)
will cause a test print output, based
upon the changed value.
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Chapter 1: Configuring the Printer
Color Adjust Menu
Display
Menus
Color Adjust
Color Adjust
Color Density
Color Density
New Value
Color Adjust
Color Density
Ready
Menus
Color Adjust
Color Adjust
Black Density
Black Density
New Value
Color Adjust
Black Density
Ready
Table 1.10 Page 1 of 3
1-43