Xerox DocuPrint NC60 Administrator's Manual page 60

Serial Menu
Table 1.14 Serial Menu functions
Menu Item and Function
Port Enable
Enable or disable the serial port.
The available values are:
On*
Off
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
30*
5 - 300 seconds ( )
This item also causes an implicit job
end such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., formfeed, reset, etc.).
The time changes incrementally by 1
second each time either Value Up or
Value Down is pressed. Holding
down Value Up or Value Down
causes continuous scrolling through
the values.
1-54 DocuPrint NC60 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Display
Menus
Serial Menu
Serial Menu
Port Enable
Port Enable
New Value
Serial Menu
Port Enable
Ready
Menus
Serial Menu
Serial Menu
Port Timeout
Port Timeout
New Value
Serial Menu
Port Timeout
Ready
Table 1.14 Page 1 of 3
=
=