To remove the component:
Power down the server (on page 17).
1.
Remove the server from the rack (on page 27).
2.
Remove the access panel
3.
CAUTION:
installing the fan to prevent finger injury.
Remove the fan.
4.
To replace the component, reverse the removal procedure.
Fan cage cover
WARNING:
internal system components to cool before touching them.
CAUTION:
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
Power down the server (on page 17).
1.
Remove the server from the rack (on page 27).
2.
Remove the access panel
3.
("Access
panel" on page 36).
The fan does not have a fan guard. Special attention is needed when removing or
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, take the appropriate anti-static
("Access
panel" on page 36).
DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 60