DAELIM VJF125 Service Manual page 254

SHAFT
REPLACEMENT
Remove the high-tension cord from the plug, remove
the plug cap.
Remove the primary wire from the ignition coil.
Loosen the ignition coil mounting bolt securing the
frame, remove the ignition coil.
Install in the reverse order of removal.
SIDE STAND SWITCH
REMOVAL
Remove the RH side covver.
Remove the side stand switch couper connected with
main wire harness
Remove the side stand switch mounting screws and
remove the cord clamp and side stand switch.
INSPECTION
Check the following terminals.
ITEM
TERMINALS COLOR
SIDE STAND SWITCH
ON
PUSH
BLACK/WHITE AND
(Side stand
THE
GREEN TERMINAL
erected)
SHAFT
PUSH THE SHAFT
BLACK/WHITE AND
OFF
RELEASE
(Side stand
GREEN TERMINAL
THE
pull back)
SHAFT
RELEASE THE SHAFT
Install in the reverse order of removal.
IGNITION SYSTEM
STANDARD
NORMAL IF THERE
IS CONTINUITY
NORMAL IF THERE
IS NO CONTINUITY
18-5