16. HYDRAULIC BRAKE
SERVICE INFORMATION· · · · · · · · 16-1
TROUBLESHOOTING· · · · · · · · · · · · 16-2
AIR BLEEDING· · · · · · · · · · · · · · · · · · · · · · 16-3
SERVICE INFORMATION
GENERAL SAFETY
Frequent inhalation of brake pad dust, regardless of material composition could be hazardous to your
health.
·Avoid breathing dust particles.
·Never use an air hose or brush to clean brake assemblies use and OSHA-approved vacuum cleaner.
Don't put in dust or water when filling the reservoir.
Don't mix different types of fluid to prevent from changing chemically.
Don't use the removed brake fluid.
Avoid spilling brake fluid or painted plastic and rubber parts because of damaging them.
Cover the joint part of the hose to prevent the leak the brake fluid from leaked.
Clean the removed parts with brake fluid and check the airing of each part with a compressed air.
Arrange the removed parts not to be soiled with dust or dirt.
After checking if dust or dirt soils each part, install them.
Always replace the specified parts.
Brake pad can be removed without disconnecting the hose.
Bleed the air in case of removing the brake hose.
SPECIFICATIONS
ITEM
SPECIFIED BRAKE FLUID
BRAKE DISK THICKNESS
BRAKE DISK VIBRATION
MASTER CYLINDER I. D.
FRONT
MASTER PISTON O. D.
CALIPER CYLINDER I. D.
CALIPER PISTON O. D.
SPECIFIED BRAKE FLUID
BRAKE DISK THICKNESS
BRAKE DISK VIBRATION
REAR
MASTER CYLINDER I. D.
MASTER PISTON O. D.
CALIPER CYLINDER I. D.
CALIPER PISTON O. D.
BRAKE PEDAL· · · · · · · · · · · · · · · · · · · · · · 16-23
STANDARD VALUE
DOT4
4.0
0.1
14.000~14.043
13.878~13.905
25.000~25.033
24.914~24.935
DOT4
4.0
0.1
12.700~12.743
12.657~12.684
25.000~25.033
24.914~24.935
Unti : mm
SERVICE LIMIT
16
-
3.5
0.3
14.055
13.866
25.07
24.87
-
3.0
0.3
12.755
12.645
25.070
24.870
16-1