DAELIM VJF125 Service Manual page 17

GENERAL INFORMATION
SYMBOLS / ABBREVIATIONS
The following symbols are used in this manual to represent job-related warnings or cautions.
SYMBOL
Indicates dangerous area. Serious
accident may result if instructions are not
followed.
The following symbols indicate needed lubrication steps, the changing of parts, and required specialized tools, etc. when
performing maintenance.
SYMBOL
( 3-1)
Special grease, etc. that do not correspond to the above are indicated without using symbols.
1-14
MEANING
Use recommended engine oil, unless otherwise specified.
Use molybdenum oil solution (mixture of the engine oil and molybdenum grease with the ratio 1:1)
Use multi-purpose grease (Lithium based multi-purpose grease NLG #2 or equivalent)
Use molybdenum disulfide grease (containing more than 3% molybdenum disulfide, NLGI #2
or equivalent)
Use molybdenum disulfide paste containing more than 40% molybdenum disulfide, NLGI #2 or
equivalent)
Use silicone grease
Apply a locking agent. Use the agent of the middle strength, unless otherwise specified
Apply sealant
Replace the parts with new ones before assembly
Use brake fluid, DOT3 or DOT4. Use the recommended brake fluid, unless otherwise specified
Use Fork or Suspension Fluid
Use special tool
Use option tool. These tools are obtained as you order parts.
Indicates reference page. (Example : Refer to page 3-1)
SYMBOL
Indicates important work. Minor injury or
vehicle part damage may result if instruction
are not followed.
Indicates general safety matters. Provides
safety and appropriate handling procedures.
CAUTION
MEANING