DAELIM VJF125 Service Manual page 112

THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT
THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT
THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT
THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT
THERMOSTAT
THERMOSTAT
REMOVAL
INSPECTION
Technical data
THERMOMETER
INSTALLATION
Disconnect the water hose from the thermostat
cover.
Remove the 2 bolts and separate the thermostat
cover.
Remove the thermostat from thermostat cover.
Suspend the thermostat in a pan of water over a burner
and gradually raise the water temperature to check its
operation.
Begins to open
Full-open
Valve lift
• Do not let the thermostat touch the pan as it will
give a false reading.
• Replace the thermostat if the valve stays open at
room temperature.
• Test the thermostat after it is opened for about 5
minutes and hold the temperature at 70
Install in the reverse order of removal.
• When assembling, the location of air vent hole
must be upward.
COOLING SYSTEM
80 2
90 3
3.5~4.5mm
6-11