Snmp Commands; Introduction - Allied Telesis AR2050V Command Reference Manual

51

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
SNMP. For more information, see:
•
•
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50186-01 Rev B

SNMP Commands

the Support for Allied Telesis Enterprise_MIBs in AlliedWare
information about which MIB objects are supported.
the SNMP Feature Overview and
"debug snmp" on page 2437
"show counter snmp-server" on page 2438
"show debugging snmp" on page 2442
"show running-config
"show snmp-server" on page 2444
"show snmp-server community" on page 2445
"show snmp-server group" on page 2446
"show snmp-server user" on page 2447
"show snmp-server view" on page 2448
"snmp trap link-status" on page 2449
"snmp trap link-status
"snmp-server" on page 2453
"snmp-server community" on page 2455
"snmp-server contact" on page 2456
"snmp-server enable trap" on page 2457
"snmp-server engineID
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Configuration_Guide.
snmp" on page 2443
suppress" on page 2451
local" on page 2459
Plus, for
"Getting Started
Guide.
2435