Table 57. Remote Access Configuration Submenu - Intel S875WP1LX Specification

BIOS Setup Program
7.1.3.12 Remote Access Configuration Submenu
To access this menu, select Advanced on the menu bar, then Remote Access Configuration.
Maintenance Main
The submenu represented by Table 52 is used to configure the remote access features.

Table 57. Remote Access Configuration Submenu

Feature Options
• Disabled (default)
Remote Access
• Enabled
• COM1 (default)
Serial Port Number
• COM2
• 115200 8,n,1
Serial Port Mode
• 57600 8,n,1 (default)
• 19200 8,n,1
• VT100
Terminal Type
• Disabled (default)
Post Boot Support
• Enabled
78
Advanced
Security
PCI Configuration
Boot Configuration
Peripheral Configuration
Drive Configuration
Floppy Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
Fan Control Configuration
Hardware Monitoring
Remote Access Configuration
Description
Permits or denies the ability to remotely manage the system.
This option is available only if Enabled is set for the Remote
Access option.
Specifies the serial port to use for console redirection. In
addition to selecting the port number in BIOS setup, make
sure the selected port is enabled for use.
This option is available only if Enabled is set for the Remote
Access option.
Specifies the modem parameters for the selected Com port.
This option is available only if Enabled is set for the Remote
Access option.
This option is available only if Enabled is set for the Remote
Access option.
Specifies whether redirection should remain active after
booting to DOS. When enabled, redirection remains active.
When disabled, redirection is disabled upon booting to DOS.
S875WP1-E TPS
Power Boot
Revision 4.0
Exit