Figure 8. Location Of The Standby Power Indicator Led (Cr7J1) - Intel S875WP1LX Specification

S875WP1-E TPS

Figure 8. Location of the Standby Power Indicator LED (CR7J1)

3.6.3.1 Wake from USB
USB bus activity wakes the computer from an ACPI S1 or S3 state.
NOTE
Wake from USB requires the use of a USB peripheral that supports it.
3.6.3.2 Wake from PS/2 Devices
PS/2 device activity wakes the computer from an ACPI S1 or S3 state.
3.6.3.3 PME# Wake-up Support
When the PME# signal on the PCI bus is asserted, the computer wakes from an ACPI S1, S3,
S4, or S5 state (with Wake on PME enabled in BIOS).
Revision 4.0
CR7J1
Functional Architecture
TP00185
29