Intel S875WP1LX Specification page 80

BIOS Setup Program
Feature Options
• Disabled (default)
Hard Disk Pre-Delay
• 3 Seconds
• 6 Seconds
• 9 Seconds
• 12 Seconds
• 15 Seconds
• 21 Seconds
• 30 Seconds
• Disabled (default)
Intel (R) RAID
Technology
• Enabled
SATA Port -0 Select to display sub-
menu
SATA Port -1 Select to display
sub-menu
PATA Primary Master Select to display
sub-menu
PATA Primary Slave Select to display
sub-menu
PATA Secondary Select to display
Master sub-menu
PATA Secondary Select to display
Slave sub-menu
7.1.3.4.1 Primary/Secondary/Third/Fourth Master/Slave Submenus
To access these submenus, select Advanced on the menu bar, then Drive Configuration, and
then the master or slave to be configured.
Maintenance Main
There are four IDE submenus: primary master, primary slave, secondary master, and secondary
slave. Table 49 shows the format of the IDE submenus. For brevity, only one example is shown.
68
Description
Specifies the hard disk drive pre-delay.
Reports type of connected SATA device. When selected, displays
SATA Port-0 submenu.
Reports type of connected SATA device. When selected, displays
SATA Port-1 submenu.
Reports type of connected IDE device. When selected, displays
the Primary IDE Master submenu.
Reports type of connected IDE device. When selected, displays
the Primary IDE Slave submenu.
Reports type of connected IDE device. When selected, displays
the Secondary IDE Master submenu.
Reports type of connected IDE device. When selected, displays
the Secondary IDE Slave submenu.
Advanced
Security
PCI Configuration
Boot Configuration
Peripheral Configuration
Drive Configuration
Floppy Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
Fan Control Configuration
Hardware Monitoring
Remote Access Configuration
S875WP1-E TPS
Power Boot
Revision 4.0
Exit