HP StorageWorks P9000 Reference Manual page 37

Option Description
-fq <mode> XP1024/XP128 Disk Array Business Copy only.
Specifies the mode whether "pairresync" is performed or not as "QUICK".
mode = normal
pairresync is performed as Non quick mode regardless of setting of $HORCC_RSYN environment
variable and/or the system option mode 87 via SVP.
mode = quick
pairresync is performed as Quick Resync regardless of setting of $HORCC_RSYN environment
variable and/or the system option mode 87 via SVP.
If this option is specified, then performing pairresync is dependent on $HORCC_SPLT environment
variable and/or the system option mode setting through the SVP whether the operation of BC is
executed by Quick -Split or not.
The relationship between "-fq" option and $HORCC_RSYN is as shown below.
-fq option $HORCC_SPLT Behavior
--------------------------------------------------
quick Don't care Quick split
normal Don't care Normal split
Unspecified QUICK Quick split
Unspecified NORMAL Normal split
Unspecified Unspecified Depends on system option mode 87
In the case of Restore (-restore is specified):
mode = normal
The pairresync -restore command is performed as Non quick mode regardless of the setting of the
$HORCC_REST environment variable and/or the system option mode 80 via SVP.
mode = quick
The pairresync -restore command is performed as Quick Restore regardless of the setting of the
$HORCC_REST environment variable and/or the system option mode 80 via SVP.
If this option is not specified, then the performing of the pairresync has being depended on
$HORCC_REST environment variable and/or the system option mode setting through the SVP whether
the operation of BC is executed by Quick -Restore or not.
The relationship between "-fq" option and $HORCC_REST are shown as below.
-fq option $HORCC_REST Behavior
--------------------------------------------
quick Don't care Quick restore
normal Don't care Normal restore
NOTE:
This -fq option also is validated on Cnt Ac-S-Cnt Ac-S/Business Copy cascading operation using
"-F BC [MU#]" option.
The -fq option is applied for only XP24000/XP20000 Disk Array and XP12000 Disk
Array/XP10000 Disk Array. This option is ignored for XP1024/XP128 Disk Array, in order to
maintain the compatibility on XP1024/XP128 Disk Array, so that you can use the same script
adding this option. If this option is combined with the -restore option in P9500 during the
maintenance work in the DCK (SVP is in modify mode), this operation cannot be completed.
-cto <o-time>
[c-time] [r-time]
pairresync 37